⚠️ Verifying Reported Hazards/Risks in (Administrators)

In Take5 Connect™️, administrators (or site managers) can verify reported hazards/risks. This guide will walk you through the process of verifying a reported hazard/risk for a project or site. 👇

---

Step 1: 🔑 Access the Project/Site

1. Log into Take5 Connect™️ and go to the Sites section in the main account menu.
2. Click Edit on the Site where the hazard/risk was reported.

---

Step 2: 📋 Navigate to Hazards/Risks

1. On the Site Overview screen, click Hazards & Risks on the right side.
2. This will bring you to the list of reported hazards and risks for that site.

---

Step 3: ✏️ Edit the Reported Hazard/Risk

1. In the Hazards/Risks list, you will see the reported hazard/risk listed as Unverified.
2. Click Edit next to the unverified hazard/risk to open the hazard editor.

---

Step 4: ⚙️ Change the Status to Verified

1. In the hazard editor, locate the Status field.
2. Change the status from Unverified to Verified and click Save to finalize this change.

---

Step 5: 📂 Confirm the Update

Once saved, the hazard/risk status will show as Verified in the list for that Project/Site.

---

❓ Troubleshooting

If you encounter issues:

• Ensure that the hazard status has been correctly updated to Verified.
• Check that you have the necessary permissions to verify hazards/risks.

---

📞 Need Help?

For additional support or questions, contact our team at:
📧 Email: support@take5connect.com
📞 Phone (NZ): 0800 582 535